Space Wolves

Adventures in Plastic Poop

by

Good Morning Folks! I hope you all had a wonderful Thanksgiving break if you celebrated it. I had a decent enough day but it pretty much wore me out completely. I am still fighting some illness and I have a doctors visit scheduled for in the morning where I am hoping going to get some help. I feel like I have something akin to “walking” pneumonia because I can function well enough… but just have zero stamina and devolve into coughing fits on the regular. We did not record AggroChat yesterday in part due to we were down a bunch of folks, but on my side… because I did not really feel like pushing it. Suffice to say that Friday when I set up my brand new 3D Printer… it took multiple passes before I had the stamina to get everything done. In truth I had done 90% of the things in a single pass, and had I ONLY dealt with the printer I would have probably been fine. However before hand I set up my last of my shelving units, and routine the power cord for the printer over the top of the door leading into the house from the garage. So by the time I actually got around to unpacking the unit I was already running low on juice.

I partook of one of the recent deals through Bambu Labs where I got their P1S printer, the AMS 1.0, and a couple of partial spools of filament for roughly $500. I realize that the P1S has recently been replaced by the P2S, and the AMS has also recently been replaced by a newer AMS 2.0 model. However I figured this was a good set up to get me started in my adventures in FDM printing. Truth be told I had been researching different printers for the better part of the last year, and this setup appeared to be the least painful and was as close as you could get to a truly out of the box turnkey experience. Truth be told other than a few hiccups where connectors popped off during assembly, and a single jam feeding filament with the AMS, it has been a pretty flawless experience. I would absolutely recommend this setup for anyone wanting to dabble in such nonsense.

As is fortold by the printer gods… the first print is required to be a Benchy. It also ships with the printer on the SD Card and was readily available. By around 2pm on Friday afternoon I had printed it out and for the most part everything seemed to be working just fine. This was with the default settings and long before I had dabbled in installing Bambu Studio or tweaking any of the parameters. My second print was a scraper, which honestly I am not sure if I am actually going to use because I am not too keen on metal blades on my textured printing plate. Instead after a bit of research I picked up some plastic razor blades which arrived yesterday and are seemingly going to work beautifully without leaving any scratches. I am well and truly knee deep in the eternal scope creep of hobbies, and I have a cooking torch on its way arriving today so I can burn away stringing when it happens.

The third print was a model designed by Miscast that is part of his permadeath vlog series. The models he has been releasing as part of this series are specifically designed to be a bit chunky so that you can print them without much issue on an FDM printer. For most miniature scale printing you really need resin printers, which is a thing that I am planning on getting into at some point but figured FDM was the better starting place. I attempted to use some of the auto settings in Bambu Studios, and was the first time That I actually laid parts out myself on the plate… and lets just say… it is also the model that made me realize I was going to need to start tweaking some of the settings. This is absolutely usable, especially when you consider that it is largely designed to be a base for kit-bashing… which is going to require a lot of post processing anyways.

So what did I do? Jump into my most ambitious print yet of course. This represents a plate of legally distinct Not-Space-Marine Not-Space-Wolf chapter base toppers. I cranked up the quality as best I could and let these stew for 14 hours, as effectively the last thing that I printed on Saturday. While they need some cleanup, and removing some support material that I had to add to deal with some of the floating aspects of a few of the designs, I think they are absolutely serviceable for the purpose of miniature bases. I printed off 25 of these in total, and for the most part I am pretty happy with them. Again I will absolutely spend a bit of time fiddling with them and smoothing out a few spots where there are textures that I did not want but they should paint up just fine when an official GW Space Marine is standing on top of them.

The first print of the day on Sunday was a set of filament clips, because I had ordered some specific colors of filament for the next big project. After doing a bunch of research I landed on this design which seems to work beautifully. Essentially I needed to eject the lime green and neon orange filament that the unit came with, so that I could load up new spool of SunLu Matte Green, and SunLu Matte Red high speed PLA. I put the other green and orange in baggies and put dessicant sachets in there as well, which is a thing that I am going to need to start saving from pill bottles. In theory you need to keep your Filament as dry as possible, and while we do not really struggle with high levels of humidity that often, apparently once it goes bad it stays bad and there is not much you can do to save it. There is a whole system that you can print out to put in the AMS 1.0 to solve this problem, which I will spend some time doing at some point.

The next project is something that I had seen somewhere along the way either on Instagram or Facebook or something of the sort. Essentially someone had the idea of making a “Lego” Christmas Wreath, and within a few minutes of searching I found several sources. I largely wanted the most simplistic design that only used the “leaves” and the 1 unit caps as berries. First off I have to say how much I love the fact that this printer has a camera. Sure I wish it transmitted at a reasonable framerate… but just having some ability to check in on your print is phenomenal, especially since I am usually upstairs in my office and the unit is humming away on a workbench out in the garage. My sibling Ace has been living vicariously through me and I have been flooding their messages with lots of progress shots as we went along.

The leaves came out beautifully and each one of them took about an hour and a half to print at the ttweaked settings that I had finally landed upon. I am not sure how much is the settings that I tweaked and how much is the fact that I swapped filament, but so far I really like the Sunlu stuff. I got it purposefully since I had heard lots of good things from folks about it specifically, and so far I agree with their assessment. It is cheap enough at $14 per 1kg spool, and in printing off six of these I barely made a dent in the spool as a whole. It took around and hour and a half for each leaf to print, and then some additional time to let the plate cool down to around 35c so I could remove it without fear of anything warping. Over the course of the day I printed all six leaves required to make the wreath and then set up a plate full of the 1x caps in Red filament to churn away while I slept.

When I got up and around this morning, I dry fit everything together and this is the result. I am not 100% sure if I like the arrangement of the caps yet, but I am pretty happy with the end product. There was some stringing down inside the red caps but it isn’t noticeable at all since they are going to get seated down on top of the leaves. I’ve heard that Plastruct works beatifully as a solvent glue to weld together PLA and I am contemplating a trip down to a local hobby shop to see if they have any over lunch. I would probably try it first with the Miscast limo to glue it up and make sure it did not destroy everything in the process, before touching this effectively final and perfect print. I could always use CA/Super glue, but I have always preferred “welding” plastic together when an option, and would love to find a viable solution for that with the ubiquitous nature of PLA.

Today however I need to sort out a better system for poop management. Essentially each time the unit clears the extruder head or switches filament color… it poops out a little bit of material down a chute in the machine that leads to it just sort of spilling out randomly onto my workbench. There are dozens of different systems that people have devised, but I am going with effectively a pretty straight forward bin that just sits up against the back of the machine to catch things as they drop out. I am holding onto this for the moment because if Plastruct works… I might try and create some sort of equivalent of “sprue glue” with it for smoothing out rough surfaces similar to how you can use it for gap filling styrene models. These remnants will also be great for testing with just to see how it works. However I did have the funny idea that if you had enough of these, they would probably make a great replacement for packing peanuts.

That was my weekend and my first steps into the 3D Printing world. Expect to see more of this nonsense in the coming weeks, and at some point I fully expect to get into resin printing as well.

Four Winds, Toxic Rain, and MyMiniFactory Sale

by

Good Morning Folks. Right now the Festival of the Four Winds is going on in Guild Wars 2, and with it comes the tradition of cashing in your troves of raw resources into loot boxes… and then being sad when you get nothing good from it. Zephyrite Supply Boxes can be purchased from several vendors on the docks of Labyrinthine Cliffs with pretty much every raw unprocessed resource in the game. Likely the most efficient option is globs of ectoplasm which net you 7 boxes each. People gamble on these because you can potentially get a super rare infusion worth around 10k gold. More than likely however you are going to get four jute scraps or something similarly useless. I cashed in pretty much everything I had, and did not walk away with anything other than stacks of festival tokens and quartz crystal. The tokens I spent on some of the homestead patterns, and the crystals I am going to keep in my inventory for daily conversions to charged crystals so that I don’t forget to do this.

Yesterday’s dailies included one of my least favorite options, which was to craft an item in the Mystic Forge. Generally speaking I do the Mystic Clover recipe, which is to combine 1 Obsidian Shard, 1 Mystic Coin, 1 Glob of Ectoplasm, and 6 Philosopher’s Stone in the mystic toilet with a roughly 33% chance of getting a clover. The cheapest option is to throw 4 random blue items into the toilet and get a random item back out with a 20% chance of upgrading its rarity. Unfortunately I noticed this long after I had already consumed all of my unidentified items and salvaged them. I could have run another event and just hit up the toilet afterwards… but I was mostly trying to knock things out so I could move on to some Path of Exile so I paid the tax for my hubris and made a clover.

Over in Path of Exile I have been leveling on my Toxic Rain character that I started last weekend. I think I have more or less gotten past the ugly duckling phase and while I am still exceptionally squishy… my damage output mostly makes up for this. I picked up a new Merc to run with it, namely the “Manyshots” variety that comes with related ice attacks to freeze things… giving me some more wiggle room while avoiding bad stuff. I have spent way the hell too much currency on this character because at this point I have probably dropped 70 Divines in total on gear. This is the problem with an alt is that you go through this phase where you have nicer gear than you should for a level and it feels bad for it to be so damned squishy as a result… when in reality you just need lots of levels before it starts to feel better. If you are curious this is where things are currently with this character.

Earlier in the league I was rotating between Primordial Blocks in my eternal search for the hideout, and Shipyard which is a nice big open layout map that happens to be attached to it. In case you do not know this… if you want to sustain maps SSF style, you set all of your favorite maps to the same map… and then exclusively run maps attached to that map in the atlas. There is a natural desire for maps when they drop, to be one of the maps attached to the map you are running. So by having a lot of favorite slots you can put your thumb on the scale and force the odds. It is not a 100% of the time thing, but it works well enough to produce a lot of the same map. When you switch the maps you are running, you flip all of your favorites to the other map you are running and essentially ping pong back between the two. I am running Shipyard at the moment because I had too many to store in my maps tab, and also they produce Blocks maps very quickly that I will run on my real character.

In other news… MyMiniFactory is running a summer sale right now and I am probably going to go shopping. I really do not love the current state of Games Workshop Dreadnoughts, so I am absolutely going to use a proxy for my budding Space Wolves army that I will be building. Namely I plan on picking up this Asgardian Dreadnought from Atlan Forge which I think will be a better stand-in for Bjorn the Felhanded than the current plastic dreadnought options. There are probably some other options that I will pick up like some of the base troops so that I can con my friend into printing some off for me to paint up as proxy Space Wolves until I figure out what recipe I am going to go with for painting that army. Once I figure out the scheme that I like I mostly want to follow that so that I have something very repeatable for doing the rest of the army. I’ve picked up some reasonable sable brushes, cheap synthetic brushes, and cheap drybrushes to get me started in this journey. In theory my painting box out in the garage might have all of my old brushes in it… but after sitting out there for thirty years they would likely need a lot of conditioning to get them functional again.

I’ve also contemplated picking up the Primal Hounds line from Greytide Studios because they seem to have a lot of really useful Space Wolf adjacent bits for modding things. At an absolute minimum I will probably pick up the base toppers, because I really dig these. All of this might actually get me to shift my opinion as to which flavor of 3D Printing I went into first… Resin seems like a massive mess but in theory I could convert my upstairs bathroom into a work room for this. It has a massive counter top that is largely being not used for anything currently. The thing that worries me though is ventilation, which in theory I could have in my wife’s office but that is going to take much longer before I could set up anything in there. In the Bathroom I at least have access to two sinks and running water and plenty of counter-space to set up a curing station. My friend has made the offer to print me stuff, but at some point that will be cumbersome for both of us.

Anyways. I think I am done writing for now. I mostly pushed myself to actually make a post today rather than waiting for tomorrow because of Blaugust and trying to get my post count up to a point where I don’t feel ashamed of it.

Of Geese, Cameras, Wolves, and Whirlwind

by

Good Morning Folks. I wish my Canadian friends would come collect their geese. We have a gaggle of them that roam around my neighborhood and this past weekend they straight up blocked my progress trying to get back home. I slowly had to ease up on them and they eventually parted and let me through. I got out of the car and tried to wave them away… but that only caused them to hiss at me and stand their ground. If you have been reading the blog for awhile you will know that they also blocked my progress when I was trying to get back to the visitation for my wife because I forgot to bring her glasses. Last night they also briefly blocked my progress when I was going to a dinner thing. It seems like they exist to be a roadblock for whenever I need to be somewhere.

Yesterday was a lot. It would have been my wife’s 49th birthday and as a result we planned on having a dinner thing at 7pm at one of her favorite restaurants. She was basic and loved Olive Garden… what can I say. I think her ACTUAL favorite restaurant was Desi Wok an Indian/Desi place in Midtown Tulsa, but it has a super small dining room and could not have supported the big group that we had last night. I am not sure the actual headcount but it was somewhere around twenty people and I mostly did okay. In truth I was way more stressed by being around that many people at one time, but I took it in good spirits. I did not get out of there and back home until around 10ish… so I was exhausted and pretty much went straight to bed. My children aka the cats were super grumpy that I had been gone all night, but quickly assumed snuggling postures with me in bed as I did my dailies in the few mobile games that I play before falling asleep.

One of the things that I need to do is come up with a reason for me to get out of the house more, and honestly be more active. I am pretty damned sedentary and have been over the five years of remote work. One of the things that I used to do with my wife was go off on camera shoots, looking for various interesting things to photograph. I am a bit fan of urban decay and turning benign subjects into abstract ones through the photo lens. One of the things I hated about this however was the weird proprietary chargers that we had to use with our canon cameras. So I started out looking to see if anyone made a version of the chargers that used USB C. Instead I found something way more cool. These are some replacement batteries that you just hook up with USB C as though they were a power bank. I bought a pair of them to try out and maybe this will jump start my desire to get out and take some photos.

My friend from High School that keeps tabs on me has also said that they want to go out and shoot photos more so I might be able to convince them to join in the madness. There are a few places that I would not mind revisiting. For example Downtown Coffeyville Kansas was really cool the weekend we took a trip up there circa 2014ish. There is also plenty of stuff in and around Tulsa to take photos of that is interesting. I remember we made a trip out to Guthrie and that was pretty great as well. Mostly the camera was a good reason to go somewhere other than my home, and while walking around looking for things to take photos of… I completely forget that I am walking around and end up putting on a bunch of steps that I am unaware of until get home and realize how tired I am. I need distractions I think and this seems like a reasonable one.

Another distraction that I am heading towards is starting up collecting and painting Warhammer 40k miniatures again. I’ve missed this but have not really had the space for it. At some point when I find someone to donate the library of math books that my wife collected over the years, I will probably start turning her office into a hobby room. At some point I envision having 3d printers set up in there and a painting desk. In the short term though I have been watching stupid amounts of videos trying to determine how best to ease back into things. The same friend from High School has said we need to do a few painting nights rather than me making a rash decision with which of the dozens of paint lines that I want to buy into. They have a smattering of various paints so that I can get a feel for how each of them works. The hobby industry has expanded significantly since I last paid any attention to it… which was around the release of Warhammer 8th edition.

Prior to that I was a Rogue Trader through 2nd edition Warhammer 40k player back when we were in High School. I grew up daydreaming about having access to all of the things that I saw in White Dwarf magazine. We did not have access to a GW store of any sort, with I think the closest one being over five hours away in the Dallas Metroplex. What we did have access to were woefully incomplete product lines at various small comic shops, but we made the best of what we could get and had a lot of fun painting them. Quite honestly having a paint night with this friend is going to be a massive throwback to our high school days where I would go to his house and abuse the large collection of apple barrel paints to paint up my squads of beakie space marines from the 30 count plastic box.

I played some more Titan Quest 2 yesterday and rolled another melee character, this time going warfare and earth instead of warfare and storm. There is significantly more synergy there and I went hard on doing a fire based whirlwind character like I have done so many times in Last Epoch. It works well enough, but still feels a bit more clunky than I would have liked it to be. However I do think a lot of what I am reading as clunk is just the slower pace of this game as compared to Path of Exile or Last Epoch. There are two problems that I need to solve with this build, the first being mana regeneration and the second being some sort of either life leech or regeneration that will keep my health topped off when I encounter status effects that I will not be able to easily avoid since I am up in the face of everything I am fighting. My goal with any build is to make them so they are self sustaining in way that I never have to hit the health potion, or at least not without me taking some massive spike of damage.

One of the things that still annoys me is how there are cases where you do not care at all about the early tiers of abilities for a specific mastery. For example I rushed pouring my divinity points into Earth so that I could pick up the aura that would make every melee attack that I do deal fire damage, because the two spells that were in the first tier were useless for the sort of build I was going for. This is sort of the thing that I was saying when it did not feel like there was much synergy between abilities. Some abilities have ways to mutate them into other types of attacks… for example you can make Lightning Bolt be a spear attack which is cool… but it would have been cooler if you could have just made that work with ANY weapon attack. Part of the reason why Path of Exile 1 is so awesome, is that in most cases you can use any attack or spell with most weapon setups, giving you some really broad freedom in how you build your character. There is more flexibility here than in Path of Exile II for example… but it also really feels like they have a build in mind for each of the trees.

Anyways. I think I am tired of writing for this morning. I am still sort of exhausted from last night, not so much sleepy tired… but emotionally drained. I told my folks when I got home that it was awfully “peopley” in there, and my Dad laughed who is also a confirmed curmudgeon. I now need to figure out what all I missed yesterday while I was not working, and figure out how to pick up where I left off from Monday. I hope you all have a wonderful day and I will figure out something to talk about tomorrow morning.