Good Morning Folks! Today is my first day without steroids so here is hoping that I do not begin to backslide on my recovery. I am still going into pretty prolific coughing fits, but only really during exposure to cold air or strenuous activity. I will admit that I went into this weekend planning on spending the entire weekend playing Guild Wars Reforged. That did not happen, but I did at least get to level 9 in Seared Ascalon. Still enjoying myself but sometimes the heart wants familiar patterns, and as such I spent most of the weekend playing Path of Exile or fiddling around with my 3D printed nonsense. The ranger/elementalist seems to be working swimmingly, other than the fact that I am not really doing anything with the elementalist portion of it. I have too many good Ranger abilities that I want to use, and not enough hotbar space to use them all.
In Path of Exile I am focused on trying to get yet another character to level 100 without taking any deaths. I am sitting at 86% to 100 and am alternating between 250ish depth delving and them relatively chill mapping. I’ve gone hardcore into creating Alva temples, because each of them if crafted properly is worth roughly a divine and they sell almost instantly. They also produce entire rooms full of rare monsters which are pretty solid experience gained per map. I am mixing this in with Ritual which also produces quite a lot of mobs on the map and as such more experience gained. Occasionally I swap back over to my Ice Trap Elementalist if I want to do a Hive Fortress, because that build is way better at clearing the entire screen than Righteous Fire is. I am hoping that over the next few days I hit level 100 so I can at least knock that off my bucket list for the season.
I’ve been doing 7 million shipments in Kingsmarch rather than sending a bunch of little shipments, and managed to get my very first ever Mirror Shard. These sell for around 35 divines each, so it was a quick infusion of capital. It feels better to do this and save up materials until I have 250k Blue Zanthemum and 1 million Dust rather than sending 10k/30k shipments out constantly. Now that I know how well this works… I will probably take this strat for future leagues, because a single shard makes up for all of the effort and I have heard there are often cases where you get multiples at once. Regardless you always get 5 or 6 Divine Orbs in a 7 million shipment so they still feel better off than a bunch of small shipments that may or may not have anything in them. I really need one of my shipments to get interdicted so I can fight the sea captain and knock it off my achievement list. I might have to start running mappers to see if one of those can get captured, because I really just need one of the kingsmarch bosses.
Over in Destiny Rising we managed to get another three stronghold week with the guild, but are reaching the point where we just need more active folks doing dailies because we keep running out of the juice required to keep our “bitcon miner” going. If you dabble in Destiny Rising and need/want a guild and are doing dailies, please hit me up so I can throw you an invite. I managed to get Jaren up high enough to start doing big kid activities and he actually becomes really useful when combined with one of the season artifact abilities that gives you a significant damage boost when you blind enemies. His movement ability that always seems to be up blinds everything around him, which means he can keep buffing damage output and shred through packs quickly. I look forward to seeing what he plays like when we do our grandmaster activities night, because I think he will inevitably be in the mix.
I finished gluing up and hanging my “Lego” Christmas Wreath and I am pretty dang happy with it. I tried solvent glues but did not find anything that would work well with PLA in spite of other discussion about it. The plastistruct stuff does have a solvent effect, but not enough of one to actually allow the plastic to bond. You could probably use it for smoothing out some minor layer lines, but nothing extreme enough to properly “plastic-weld” things together. So instead I relied on good old fashioned superglue and just letting it sit for awhile to make sure it was properly bonded. I cut out felt strips for the back of the wreath and placed those on the 3 highest points so that it would keep things from banging a lot when I hung it. So far I am pretty damned chuffed by it, and can absolutely see creating variations of this for other holidays.
I also finished up printing my second cabinet, but ran out of black filament and had to substitute in something else. I MIGHT reprint that single top of the unit in black because I ordered some refills that should be coming in today. I don’t mind the white but do think I would rather have them all be black structure with colored shelves. I can’t look at anything red and white without thinking of Oklahoma University, which is a thing I already see way too often anyways. I’ve got a really pretty turquoise filament that I ordered that should also be arriving today. For the black I am using spool-less refills for the first time since I now have a decent assortment of reusable spools, so hopefully that goes smoothly. It takes the cost per roll down to around $10 instead of $16, which for a bulk color like black seems like a good option. Right now as we speak my printer is idle for the first time since I got it, mostly because I am waiting on the black filament before I dive back into another series of prints.
I exported one of the timelapse videos that the P1S makes all the time while printing. I’ve already reached the point where I greatly prefer the Sunlu filament to the default Bambu Labs stuff that came with the unit. The Sunlu just ends up with a better finish and it is so much easier to remove supports from it. I printed this little guy in the green filament that came with the printer, and getting the supports off was a pain in the ass. I had to actually break out nippers to cut loose some of the elements that were holding onto the backside of his teeth because I was afraid they would do damage to the actual structure. I am slowly building up a toolkit of things to deal with bad prints, and I feel like I need to search for some sort of a hooked tool that I can print for pulling on supports. I used bambu scraper without a blade in it, to a decent amount of luck to help break free some of the big supports. I think one of my next missions is going to be to start actually organizing my damned tools so I can find things when I need them, because I have decades worth of tools scattered around the house in four different places which is not useful at all.
I had my first print go completely off the rails. I had been trying to print some spindles for a spinning wheel that Ace uses, because I am sending them a dino friend and figured I might as well try printing off a few bobbins while I was at it. I successfully printed off one for their current machine, but when I moved on to trying to print one off for a machine that is currently backordered… things went sideways. I think there were a few things that happened. Firstly I think the part was a bit too fine detail and it maybe had some overhangs that auto supports were not taking care of. Then there was a problem where one of the parts that was very fine… popped up off the bed and then the printer got confused trying to chase it around as it moved. I had tiny bits of white filament everywhere… above the plate, below the plate, on the gantry tracks, at the back of the unit, and most concerningly around the vertical screw drives. I happened to catch it when I looked at the preview and cancelled the print and then cleaned everything up. I might give this another go but I think I will need to increase the wall size or something to make sure it is printing out slightly thicker objects.
I started a new book this weekend as well, but I admit I have not made it super far into it. In 2023, I read the first two books in this series back to back and enjoyed myself. However coming back they feel immensely dense, at least compared to the relatively light reads that I have been doing lately. It is a very Norse mythology themed series and everything has a bunch of hard to pronounce names to remember… and quite frankly the two chapter long rapid fire catch up preamble was a bit much to get through on its own to remind you of what happened in the previous book. I am going to push through this, because I do not want to have a “did not finish” on my list for the year, but it is going to be a bit of a challenge. It is weird how tastes shift over time, because I was fully on board with these novels the first time, but now that I am going back for book three it is a slog.
I am hoping yall had a wonderful weekend that was filled with something interesting. Right now I have used almost all of the superglue that I went out to get over the weekend and am waiting on some bulk shipments to arrive so I can finish putting some of the other projects together. I got an order of magnets and metric machine screws which will further expand what I can do with this nonsense. I still need to get a good set of calipers and might make a trip the next town over to harbor freight to pick up a pair there. I am having a heck of a lot of fun with 3D Printing, and it is way the hell more engaging than I even thought it would be.
